Product Description:
Swiss Type Lathe Syntec or Mitsubishi N/C controller Front-side and Back-side drilling and tapping, milling Built-in Motor Composite turning, drilling, milling and tapping 5 axes turning (x,y,z,x2,z2) Flat Bed Structure Spindle dividing of 4" /1000 Synchronous or Simultaneous Turning available
Product Description:
Syntec N/C controller Gang-Type Tooling System (15¢X slanting structure) Front-side milling and drilling Side-Face tools (optional) for milling and tapping Flat Bad Structure 3 axes turning(x,y,z) Horizontal and Vertical Turning available
Product Description:
Syntec N/C controller Gang-Type Tooling System (15¢X slanting structure) Front-side milling and drilling Side-Face tools (optional) for milling and tapping Flat Bad Structure 3 axes turning(x,y,z) Horizontal and Vertical Turning available
Product Description:
Swiss Type Lathe Syntec N/C controller Front-side and Back-side drilling and tapping, milling Off-center Drilling and Tapping Slant turning (from 0¢X-90¢X, every 15¢X) Composite turning, drilling, milling and tapping 5 axes turning (x,y,z,x2,z2) Slant Bed Structure (45¢X) Spindle dividing of 4¢X / 1000 Synchronous or Simultaneous Turning available
Product Description:
Main Structure Meehanite cast iron one piece structure with 45 degree slant bed design offers overall stability, rigidity, rigidity and durability of the machine. Special headstock design eliminates thermal displacement and assure continuous processing accuracy.
Product Description:
Hydrondyamic Effect If the spindle speed is zero, the hydrodynamic support is zero and the bar rests on the feed tube. The revolving bar products increased oil pressure ang the bar is lifted from the bottom of the feed tube. With increasing speed, the hydrodynamic force increases and the bar revoves centrally ensuring a smooth feed.
Product Description:
Meehanite cast iron construction with internal heavy duty ribs diminish vibration and ensure rigidity. Designed for easy elimination of chips. 30¢X slant beds integrate entire structure, eliminating vibration and promoting overall stability. Both X and Z axes employ a broader box way, hardened, and precision ground. TURCITE-B Teflon coated linear slide ways allow greater surface contact, reduce wear and enhance processing stability. Ball screws ranked C2 and C3 respectively at X and Z axes, reducing vibration and limiting discrepancy.
Product Description:
Swiss Type Lathe Syntec N/C controller Front-side and Back-side(Center and off-Center) drilling and tapping Composite turning,drilling,milling and tapping 4 axes turning(x,y,z,z2) Main & Sub(caxis) can work with side-milling Flat Bed Structure Spindle dividing of 4¢X / 1000
Product Description:
Capacity Table Sizes 150 ¡Ñ 460 mm Longitudinal Travel 480 mm Cross Travel 170 mm Spindle Center to Table Surface 460 mm Magnetic Chuck Size 150 ¡Ñ 450 Longitudinal Feed Manual Travel 530 mm Automatic Travel 510 mm Table Traverse Rate 5~25 M/min Cross Feed Manunal Travel 180 mm Automatic Travel 170 mm Automatic Feed (variable) 0.5~10 mm Hand Wheel Per Revolution 5 mm Hand Wheel Per Graduation 0.02 mm Micrometric Adjustment Per Revolution 0.2 / 0.001 mm Vertical Feed Hand Wheel Per Revolution 1 mm Hand Wheel Per Graduation 0.005 mm Micrometric
Product Description:
Spindle Spindle Nose ISO A2-5 Chuck Dia. F48 Collet Chuck 6" AC Spindle Drive Motor AC 7.5 kw/10 HP Spindle Speed 6000 rpm Travel Max. X-Axis Travel 350 mm 125 mm Max. Z-Axis Travel 250 mm 320 mm X-Axis Rapid Traverse Speed 20 m/min 20 m/min Z-Axis Rapid Traverse Speed 20 m/min 20 m/min Least Input Increment 0.001 mm 0.001 mm Motor Coolant Pump Motor 1/4 HP 1/4 HP Lubrication Capacity Time Adjustable Time Adjustable MACHINE Machine Dimension (L¡ÑW¡ÑH) 2,200 ¡Ñ 1,450 ¡Ñ 1,600 mm 2,200 ¡Ñ 1,450 ¡Ñ 1,600 mm Floor Space 2,700 ¡Ñ 1,600 mm 2,700 ¡Ñ 1,600 mm Machine Wei
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
