Product Description:
5/6 POINTS SAFTY SEAT BELT There is special material on shoulder area in order to prevent sliding ¡@ and to increase the life time! The seat shell is made of light Frp / Carbon / Kevlar material. ¡@( SP-B is made of FRP/SP-BC is made of Carbon/ SP-BK is made of Kevlar ) With high density foam rubber, shape to leg providing best support. SHAPE WITH ONLY ONE FRAME RED/ BLUE/ BLACK clolor The cloth is long duration material and guarantee the long life time.
Product Description:
5/6 POINTS SAFTY SEAT BELT There is special material on shoulder area in order to prevent sliding and to increase the life time! The seat shell is made of light Frp / Carbon / Kevlar material. With high density foam rubber, shape to leg providing best support. SHAPE WITH ONLY ONE FRAME RED/ BLUE/ BLACK clolor The cloth is long duration material and guarantee the long life time.
Product Description:
5/6 POINTS SAFTY SEAT BELT There is special material on shoulder area in order to prevent sliding and to increase the life time! The seat shell is made of light Frp / Carbon / Kevlar material. ( SP1 is made of FRP/SP1C is made of Carbon/ SP1K is made of Kevlar ) With high density foam rubber, shape to leg providing best support. SHAPE WITH ONLY ONE FRAME RED/ BLUE/ BLACK clolor The cloth is long duration material and guarantee the long life time.
Product Description:
Features: 1.Easy to operation. 2.Low cost, high practicality. 3.High quality of alloy steel that can maintain each lubrication point with oil. 4.The length of L can be customized. Standard length is steel tube 300 mm.
1.Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant. The discharge volume of each outlet is 0.18 cc/stroke.
2.Every piston of CV type progressive feeders cannot deliver its lubricant until the preceding one has discharged it.
3.If one feeder section doesn't receive any lubricant or is blocked, the entire CV type progressive feeder will stop, and that situation can be noticed by the signal of the feeder.
4.The standards are assembled detective piston, which can be seen if operation is normal.
1.CENA type has a timer, which controls the operation and interval time. It has operation, abnormal and interval indicators that is easy for visual checking. 2.It has a pressure-regulating valve, which can adjust the pressure. 3.It has a pressure gauge that can detect the pressure easily. 4.It has a float switch (NC Contact) that can detect the oil volume. When oil is lower than the minimum level, the float switch will send continuous signal automatically. 5.It has a reset button (RES button), press the button, and it would return to the original setting time and start the cyc
Product Description:
Features: 1.Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant. 2.T and CDB type have many kinds of discharge volume to be chosen: 0.1, 0.2, 0.3, 0.4, 0.5 cc/stroke. As ordering, please details the discharge volume wanted. 3.The standards are assembled detective piston, which can observe if operation is normal. 4.CDB, T type volume distributors have to work with pressure-relief type lubricators, and lubricant will feed during the interval time of the lubricator. 5.T type could be assembled NO (Normal Open) or NC (Normal Close) senso
Product Description:
Features: 1.CLHA type has good tight pressing iron, which can press grease out smoothly. 2.Low cost, and high practicality. 3.Easy to be operated by pushing the handle down for oil feeding. 4.Small size and easy for installation. 5.CLHA type is suitable for grease NLGI grades 0 to 000,and CLHP type is suitable for grease NLGI grades 0 to 2. 6.Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir. 7.Fill the lubricator with grease to exhaust air before the distributors are mounted.