Product Description:
This machine is specially designed for insulating paper insertion of large and middle size stator. Except to put on and take off stator, all procedure are done by the machine automatically. The large size stator is able to be put in and taken off automatically after inserting. Also it can stick the tape on side of up and down of slot according to customer¡¦s request. Therefore, the production cost will be highly reduced by decreasing the material loss and labor cost.
Product Description:
Microprocessor in this machine ensures it to be suitable for different kind of lacing function. The tension device to adjust the lacing tension is also equipped. Laced coil in the shape of tortoise shell increases the lacing efficiency.
Product Description:
The machine is suitable for forming up the large to medium size stator coil. It can be requested size by the principle of in-spreading and out-shrinking in internal shrinking membrane and external shrinking membrane. Especially, it¡¦s suitable for forming the two poles of coil with high difficulty.
Product Description:
The machine is suitable for forming up the small to medium size stator coil, the operator puts the coil on left side roller to form up inner side of coil, then put the stator on right side forming mould to finally form up height, inner and outer side of coil to ensure the end product to meet the required specification.
Product Description:
When forming mould, the wedge will be pressed out by the coil. The formed wedge will be pressed in slots by wedge machine when it¡¦s close to the slots. It will prevent the coil from coming out.
The machine is suitable for forming up the small to medium size stator coil, the operator puts the coil on left side roller to form up inner side of coil, then put the stator on right side forming mould to finally form up height, inner and outer side of coil to ensure the end product to meet the required spe
Wedge is inserted automatically in accordance with stack height of stator, and coil can be inserted automatically with one pass in compliance with specification of winding by transfer tool. It can enhance insertion efficiency highly, and reduce the production cost.
The winding machine is suitable for minimum winding 24pcs of coils simultaneously. The feeding speed of wire arrangement can be selected simultaneously according to diameter of wird or any pre-set speed.
Microprocessor in this machine ensures it to be suitable for different kind of lacing function. The tension device to adjust the lacing tension is also equipped. Laced coil in the shape of tortoise shell increases the lacing efficiency.
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
