Product Description:
1. P Series is Swing-arm robots, with both single-stage arm and telescopic arm available¡G Single Stage: Vertical Stroke 550/650mm available¡Asuitable for flat-type injection moulding machine of below 150 tons; Telescopic: Vertical Stroke 650/750/850/950mm available, suitable forflat-type injection moulding machine of below 400 tons; 2. P Series is mainly applied to pick out sprue runner and product,it can swing the arm out of mould after holding the runner, and then move downwards till releasing it. This series is generally used to pick runners or simple & light product, since it has only si
Product Description:
Atlas series robots are suitable for picking out mouldings of all types horizontal injection moulding machine of 50~200 tons. Robot arm is all single stage type, and runner arm can be installed for 3-piece-mould, to grip both runner and product at the same time. Vertical stroke of 550/650mm available. Not only can it help to increase production capability (by 15~30%), to enhance the product quality, but assure the workers' safety and decrease their tiredness. Further, it can precisely control the yield level, and avoid wasting.
Product Description:
Atlas series robots are suitable for picking out mouldings of all types horizontal injection moulding machine of 50~200 tons. Robot arm is all single stage type, and runner arm can be installed for 3-piece-mould, to grip both runner and product at the same time. Vertical stroke of 550/650mm available. Not only can it help to increase production capability (by 15~30%), to enhance the product quality, but assure the workers safety and decrease their tiredness. Further, it can precisely control the yield level, and avoid wasting.
Product Description:
COBRA series robots are suitable for picking out mouldings of all types horizontal injection moulding machine of 450~4000 tons. All this series robots arm are telescopic type, for which, runner arm can be installed for 3-piece-mould, to grip both runner and product at the same time. Vertical stroke of 1300~2500mm available. Not only can it help to increase production capability (by 15~30%), to enhance the product quality, but assure the workers' safety and alleviate their tiredness. Further, it can precisely control the yield level, and avoid wasting
Product Description:
Recommended Application: Injection Moulding Machine of 50¡Ð550 Tons¡F
Driven by three-axis servo motor, with dry take-out time of 0.6 second, and dry cycle time of 5.6 seconds;
Utilizing silenced linear slide rails for each axis, with low noise; Robot arm is built with strap-multiple-speed driving mechanism, which ensures high-speed movement;
Utilizing Mitsubishi servo motor, driver, and its specialized controller system;
Touch panel eases settings and operations;
Completely digital setting, convenient for mould changing;
Product Description:
Recommended Application: Injection Moulding Machine of 200-350 Tons¡F Side-entry axis is driven by AC servo motor; High-speed pick-out action, with dry take-out time of 1.5 second; Applied for 8~32 cavities per mould, and with EOAT replaceable; Completely digital touch panel eases operation & settings; Pneumatic cylinder or servo motor is optionally being added for crosswise driving;
Product Description:
An innovative structural design which is more sturdy and durable than the traditional design, and can bear a loading up to 2,500 kgs. Lift forks can be disassembled and separately replaced. Economical and practical-one Pilot pallet truck can match several other pallet trucks. Adjustable fork connecting rods. Patented in USA, Taiwan, Japan, Germany, China.
Product Description:
We offer special specifications : Overall Width: 300mm ~ 1500mm , Fork Length: 450mm ~ 3000mm , Lowered Height: 35, 45, 55, 65, 76, 80mm , Specially designed for Vendor Machines, Paper Pallet, Roll and use in Grand Marts.
Your search for " " has found products
