Product Description:
Material: Full aluminum alloy 7005 P.G. or Full triangle: aluminum alloy 7005 , Rear triangle: hi-ten steel or Full cr-mo or hi-ten steel tubes.
Product Description:
1. SB-SA type from 200 mm diameter to 3660 mm diameter , conform to the standard "AWWA C504"and "CNS 12741-B2798" for short-body flange rubber-seated butterfly valve. 2. SB-GJ type from 400 mm diameter to 2000 mm diameter , conform to the standard"JIS B2064" and "CNS 12742-B2799" butterfly valve for waterwork. 3. SB-TP type from 100 mm (4 in) diameter to 1800 mm (72 in) diameter , conform to the standard "AWWA C504" for short-body flange rubber-seated butterfly valve and " MSS SP-67" butterfly valve. 4. The body seat is firmly secured to the inside circumferential surface of the valve
Product Description:
1. SB-SA type from 200 mm diameter to 3660 mm diameter , conform to the standard "AWWA C504"and "CNS 12741-B2798" for short-body flange rubber-seated butterfly valve. 2. SB-GJ type from 400 mm diameter to 2000 mm diameter , conform to the standard"JIS B2064" and "CNS 12742-B2799" butterfly valve for waterwork. 3. SB-TP type from 100 mm (4 in) diameter to 1800 mm (72 in) diameter , conform to the standard "AWWA C504" for short-body flange rubber-seated butterfly valve and " MSS SP-67" butterfly valve. 4. The body seat is firmly secured to the inside circumferential surface of the valve
Product Description:
1. The Flap Valves are designed to withstand the stresses resulting from high-head seating conditions and to maintain maximum sensitivity to unseating heads. These flap valves are found in water purification projects , drainage projects, filtration plants, sewage treatment plants, settling basins and many other kind of installations. 2. Model : FV-P Flap Valves are specifically designs to withstand stresses resulting from large acceleration and deceleration forces produced by "on-off" flow, characteristic in most pump discharge piping or gravity flow.
Product Description:
1. Nominal Size : 2" ~ 12" (50 ~ 300 mm). 2. Type of fluid :Water, Sewage, Seawater, Oil, Air, etc. 3. Working pressure :10 kgf/cm2 (150 psi) 4. Flange type of connecting pipe : JIS B2210-10K, ASME B16.1 Class 125, ASME B16.5 Class 150 ISO 2531 PN10, AWWA C207. 5. Face to Face : ISO 5752 Table 5 Short, JIS B2032 Series No.46, MSS SP-67 for Narrow. 6. Hydrostatic test : Body pressure -- 21 kgf/cm2 (300 psi). Seat pressure -- 10 kgf/cm2 (150 psi) .
Your search for " " has found products
