Product Description:
The double hydraulic cylinder provides secure hold on pressurefor the injection carriage eliminating nozzle leakage. The toggles are lubricated with the graphite bronze bushes to ensure lower friction wear, assure greater accuracy and greatlyextended life of the clamp unit. Fast clamping system equipped with regeneration circuit increase speed by 60% to shorten cycle time and save energy. Bosch proportional valves are equipped with LVDT positional feedback and pressure transducer. The speed of the proportion-al valves is more precise resulting in more accurate control.
Product Description:
The injection unit uses the high performance servo motor, the ball screw and the linear guide way. The high injection precision and the low backlash can be reached. The positional accuracy of the clamping, ejection and decompression can reach 0.01mm. Auto-lubrication system is provided to assure the constant lubrication of the toggle mechanism. The plasticizing speed can reach 500 rpm to reduce the plasticizing time. Suitable for high precision and thin walled products.
Product Description:
Close loop servo controller Max. injection speed above 600 mm/sec equipped with accumulator. High response system, injection pressure pre-load design reduce the time of stepping up Hydraulic pressure. Clamping, injection, back pressure individually controlled by motion card for precise control. Fast and precise acceleration & deceleration by Meter-in /Meter-out injection control.
Product Description:
The new design has ensured maximum space between tie bars, as well as a large daylight area. The fixed and moving platens are designed in such a way that the yensure complete accuracy and precision. The injection carriage uses a balanced double hydraulic cylinder to provide a secure hold between the mould and the nozzle to eliminate nozzle leakage. Linear guide ways reduce mechanical friction, decrease machine wear and increases accuracy over back pressure providing better control of the injection sequence. Bosch proportional valves are equipped with LVDT positional feedback and pressur
Product Description:
SM-5EJ Micro Injection Molding Machine characteristics Three stage injection structure, metering, injection and plastic separation. High Precision injection thru servo electric drives, while a fully closed loop control for reduction of acceleration and deceleration time to achieve optimal injection control. With a tie-bar less clamping unit, greatly increases the efficiency of the tool change while maximizing the needed mold space. High pressure clamping is accomplished thru a central clamping structure which can limit the deformation of the moving platen thus increasing product stabilit
Product Description:
Saves up to 20% of the machine floor space. (foot print) Automatic mould adjustment saves on mould-changing time. Clamping cylinder builds up high pressure rapidly by using split nut lockup. Short stroke clamping cylinders prolong oil seal life. Wide tie bar spacing and mould opening stroke, ideal for the pro-duction of any products either wide or deep draw. Four balanced clamping cylinders ensure long lasting tie bar perfor-mance.
Your search for " " has found products
