Product Description:
An aluminum encased resistor consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure. Following high-temperature anodization, the enclosure is filled with a special non-flammable cement paste and after hardening, insulation is applied through a high-temperature process. Since the resistor is embedded in the heat-proof cement, it is not affected by external mechanical force, dusty environments, and extreme duty. It is durable, vibration-proof, dissipates heat well, and has a low temperature coefficient, with resistance varying in direct proportion. Supportin
Product Description:
A C-shaped ceramic resister is wound with copper or chromium-alloy wire as a resistance element. Except for the slide contact surface, the entire component is coated with a high-temperature, non-flammable resin. After cooling and drying, insulation is applied through a high-temperature process. Then, a centered rotating adjuster component is installed, which slides along the resistance element and varies the resistance to the desired value. The scope of the application includes educational modeling, load simulations, industrial machinery RPM adjustment, voltage and current adjustment, instrume
Product Description:
Wire wound resistors are made by winding resistance wires around non-alkaline heat-resistant ceramic core which is added with an outer layer of heat and humidity resistant and non-corrosive protective material, and a coating of silicon resin paint. The resulting resistors have low tolerance. Features 1. Excellent heat resistance; small temperature coefficient displaying linear change. 2. Instant overload capability; low noise and no annual shift in resistance value. 3. Noncombustible, light weight and cheaper than enameled resistors. 4. More durable than enameled resistors that are made a
Product Description:
1.Small size with high-density packaging, suitable for use in printed circuit board. 2.Automated mass production and competitively priced. 3.Stringent process control is carried out in every step of production to ensure high reliability and quality stability.
Product Description:
There are some similarities between Resistor and Fuses in material and structure. Fusible Resistors contain both functions, as being Resistor in normal condition and changed into fuse while abnormal Current comes in to protect machine and equipment. Since two functions performed by one resistor, the cost therefore saved. YESO FR Fusible Resistor series are produced with precision technique,Enabling precise fusing time and stabilized, aiming to reach best Quality resistors
Product Description:
Metal film resistors are made by depositing special treated metal film onto ceramic core in ultra high vacuum. Both ends of the core are plated with precious metal to ensure low noise and small temperature coefficient. MF resistors are widely applied in high fidelity stereo, electronic calculators, computers, testing instruments, meters, auto controlled equipment, military devices and aerospace equipment.
Product Description:
For resistors to show long-term stability under high temperature, the unit area of resistance film must withstand larger loads. The small-sized, high-performance metal oxide film resistors are made of high-quality ceramic core with size greatly reduced in comparison with RS, while having the same performance of large-sized resistors.
Product Description:
1.2-step crushing: coarse crushing at top tier ,powdering crushing at bottom tier. 2.Suitable for instant crushing of large area material.
Product Description:
Standard for cutter selection 1.Material being cut or crushed. 2.Material and component of cutter(S45C, SKH-2, SKD-11, T.C.T.) 3.Material made in German, Sweden, Poland, Japan, Taiwan, Mainland China) 4.Hardness and tensile strength(HRC)
Your search for " " has found products
